                        Changes in version 2.0.6                        

  - add Rd file for AQS_DATAMART_APIv2 S3-class
  - internal functions now use the @internal roxygen2 flag so that
    internal function documentation is not included in the reference
    manual.
  - functions previously marked as deprecated in earlier versions of
    RAQSAPI are no longer exported and now marked with @internal
    roxygen2 flag so respective documentation is not included in the
    automatically generated reference documentation.
  - resume using package:goodpractice, goodpractice is now maintained by
    rOpenSci
  - code formatting now done using the air formatter
  - Mocked unit tests using package:httptest2
  - Many improvements to project documentation thanks to Maria Morresi
    of ASRC Federal and Cynthia Sthal from the EPA.
  - Many improvement to project code thanks to rOpenSci Review by Milan
    Malfait, Rainer M Krug and Mark Padgham
  - RAQSAPI no longer stores credential information in the R global
    environment, instead credentials are stored in a private package
    environment.
  - New Contributing, code of conduct documentation, RAQSAPI is now open
    to taking code contributions.
  - Reduce the number of vignettes exported from RAQSAPI.
  - RAQSAPI no longer depends on the gtools package.
  - Only aggregate functions using the following services accept cbdate
    or cedate parameters. Other functions do not expose these
    parameters, this is consistent with the AQS DataMart API.
      - Sample Data
      - dailydata
      - quarterlydata
      - annualdata
      - transactionsample
  - RAQSAPI now has a pkgdown site.

                 Changes in version 2.0.5 (2024-06-12)                  

  - remove deprecated package:goodpractice from SUGGESTS
      - Added the ability to display server side messages for errors in
        API calls.
      - Added a new CITATION.cff for thanks to R package cffr.
      - New hexsticker.
      - aqs_isavailable no longer accepts the return_header parameter,
        this function just returns a tibble and not a AQS_Data
        Mart_APIv2 object.
      - fixed an issue where the duration parameter was being ignored in
        aqs_sampledata_by_* functions.
      - add note to aqs_sampledurations function about not returning
        calculated durations *RAQSAPI 2.0.4 was not published on CRAN.
      - The rate limit has been changed from a constant 5 second wait
        time to a maximum of 10 requests per minute.
      - RAQSAPI will retry certain requests if they fail for a maximum
        of 5 times after a 10 second wait time.
      - Moved to the Httr2 backend, removed desc from suggests and httr,
        and jsonlite as from imports.
      - There is an issue with curl connecting to the AQS DataMart API,
        on windows platforms, as a temporary fix, RAQSAPI will default
        to using the Schannel curl backend.
      - modify QA Collocated Assessments by County and by Site unit
        tests and example code to reflect modified data.
      - update CITATION file to the new style citation.
      - Package documentation referenced *dailydata* functions
        incorrectly, functions should be called *dailysummary*
      - Switched license from CC0 to MIT, RAQSAPI will use MIT going
        forward.
      - a note Rd tag was added to the checkaqsparams function
      - minor correction to the documentation of the
        aqs_monitors_by_state function
      - Update github actions to the new workflow available through
        package:usethis-2.1.6
          - usethis::use_github_action("test-coverage") to add coverage
            information in the git repository.
          - usethis::use_github_pages() to create a github page.

Test environments

  - local R installation, Windows 11 R 4.4.0
  - Windows-latest (release) (via Github_actions), R 4.4.0
  - MacOS-latest (release) (via Github_actions), R 4.4.0
  - Ubuntu-22.04.4 (release) (via Github_actions), R 4.4.0.1
  - Ubuntu-22.04.4 (devel) (via Github_actions), R (unstable)
    (2024-06-10 r86715)
  - Ubuntu-22.04.4 (old-release) (via Github_actions), R 4.3.3

                        Changes in version 2.0.4                        

*Important API change

  - aqs_qa_annualperformanceeval* and
    aqs_qa_annualperformanceevaltransaction* functions have been renamed
    with more appropriate spelling. This may effect external code that
    depends on these functions.
  - many update to the reference documentation to improve consistency
    and fix issues.
  - Minor updates to the README.
  - Minor improvements to code.
  - This version was not published on CRAN but builds are available on
    github.

                 Changes in version 2.0.3 (2022-01-28)                  

  - this is a minor release
  - Remove dependency on package:gtools.
  - remove calls to depreciated functions imported from package:rlang
  - updates documentation to include a note about the timeliness of data

                 Changes in version 2.0.2 (2021-11-29)                  

  - This is a major release

Reason/Significant changes

  - new hexsticker!
  - Add MD5
  - Correctly throws an error if a RAQSAPI function is used without
    providing credentials (issue 5)
  - Updated documentation (Thanks Hayley Brittingham)
  - a lot of code cleanup
  - minor issues in documentation fixed
  - RAQSAPI functions now checks parameters before sending calls to API
    (issue 6)
  - renamed non-exported functions containing dots in names with
    underscores.
      - This should not affect end users.
  - added CITATION entry
  - New service APIs aqs_qa_annualperformanceeval_by_,
    aqs_qa_annualperformanceevaltransaction_by_, quarterlysummary_by_*,
    resulting in 15 new exported functions
      - aqs_qa_annualperformanceeval_by_county,
      - aqs_qa_annualperformanceeval_by_MA,
      - aqs_qa_annualperformanceeval_by_pqao
      - aqs_qa_annualperformanceeval_by_site,
      - aqs_qa_annualperformanceeval_by_state,
      - aqs_qa_annualperformanceevaltransaction_by_county,
      - aqs_qa_annualperformanceevaltransaction_by_MA
      - aqs_qa_annualperformanceevaltransaction_by_pqao,
      - aqs_qa_annualperformanceevaltransaction_by_site,
      - aqs_qa_annualperformanceevaltransaction_by_state
      - aqs_quarterlysummary_by_county
      - aqs_quarterlysummary_by_state
      - aqs_quarterlysummary_by_site
      - aqs_quarterlysummary_by_cbsa
      - aqs_quarterlysummary_by_box
  - aqs_monitors_by_* functions now include a new optional duration
    parameter to filter results by duration code
  - New list function aqs_sampledurations to retrieve a table of valid
    sample durations.

Test environments

  - local R installation, Windows 10 (Windows 10 Version 20H2 OS
    Build 19042.1348), R 4.1.1
  - local R installation, Gentoo GNU/Linux R 4.1.0
  - Windows-latest (Microsoft Windows Server 2019 10.0.17763) (release)
    (via Github_actions), R 4.1.2
  - macOS-latest (Mac OS X 10.15.7) (release) (via Github_actions),
    R 4.1.2
  - Ubuntu-latest (Ubuntu 20.04.3 LTS) (release) (via Github_actions),
    R 4.1.2
  - Ubuntu-20.04 (Ubuntu 20.04.3 LTS) (oldrel1) (via Github_actions),
    R 4.0.5

                 Changes in version 2.0.1 (2021-03-31)                  

  - This is a new release.

Reason/Significant changes

  - This version fixes issues with aqs_annual_summary_by_box.
  - updates and corrects issues in README.
  - add CI/CD (github actions) to git repository.
  - separate AQSAPI.R into smaller more manageable files.
  - devtools::package_coverage() now works
  - lifecycle(maturing)
  - 4 new functions
      - aqs_transactionsample_by_county
      - aqs_transactionsample_by_MA
      - aqs_transactionsample_by_site
      - aqs_transactionsample_by_state

Test environments

  - local R installation, Windows 10 R 4.0.3
  - local R installation, Gentoo GNU/Linux R 4.0.4
  - Windows-latest (release) (on Github_actions), R 4.0.4
  - macOS-latest (release) (on Github_actions), R 4.0.4
  - Ubuntu-20.04 (release) (on Github_actions), R 4.0.4
  - Ubuntu-20.04 (devel) (on Github_actions), R 4.0.4

remote R CMD Check results (github actions)

  - Check runs successfully on all environments.

Local R CMD check results

0 errors | 50+ warnings | 0 notes

Found the following (possibly) invalid URLs: URL:
https://aqs.epa.gov/aqsweb/documents/data_api.html> From: DESCRIPTION
Status: 404 Message: Not Found URL: https://github.com/USEPA/RAQSAPI>
From: DESCRIPTION Status: 404 Message: Not Found

The above URIs work as expected, Not sure why this warning appears.
Maybe because it is a https address?

Reverse dependency check

Currently no reverse dependencies.

                 Changes in version 2.0.0 (2021-03-13)                  

  - Initial RAQSAPI release on CRAN and github
    
    0 errors | 50 warnings | 1 notes

Found the following (possibly) invalid URLs: URL:
https://aqs.epa.gov/aqsweb/documents/data_api.html> From: DESCRIPTION
Status: 404 Message: Not Found URL: https://github.com/USEPA/RAQSAPI>
From: DESCRIPTION Status: 404 Message: Not Found

  - The above URIs work as expected, Not sure why this note appears.
    Maybe because it is a https address.
